1. Unreasonable design of the accessories of the machine-made charcoal equipment: the cross-sectional gap between the propeller and the forming cylinder of the rod making machine will affect the forming resistance of the raw material, resulting in uneven pressure and flow rate when the raw material passes through the propeller, resulting in the extrusion of the forming rod Deformation, so before proceeding with rod making work, be sure to check whether the movement of the machine-made charcoal equipment is normal.
2. Moisture of raw material for rod making. The moisture in the raw material has a certain effect on the charcoal machine-made rod. If the moisture of the raw material is too high, the plastic forming standard will not reach the standard hardness during the rod making process, so the extruded fuel rod will naturally be curved. Therefore, it is necessary to remove the raw material moisture before making the rod. If the moisture is too high, a dryer can be equipped.